Invert Colour
Posted: Tue Nov 29, 2016 7:14 pm
In GoWrite and for an SGF diagram, the colour of several or all setup stones is inverted as follows:
1. Mark stones.
2. Select a setup stones tool.
3. Double-click on one of the marked setup stones.
This procedure inverts the colour of the marked setup stones but does not affect the colour the marked other stones (created by moves). Either the black or white setup stones tool can be selected. If all stones are marked setup stones, the whole position is colour-inverted.
1. Mark stones.
2. Select a setup stones tool.
3. Double-click on one of the marked setup stones.
This procedure inverts the colour of the marked setup stones but does not affect the colour the marked other stones (created by moves). Either the black or white setup stones tool can be selected. If all stones are marked setup stones, the whole position is colour-inverted.